Your outdoor fireplace starts below the frost line, with your town’s rules checked first, so it stands straight every spring. We’ve been building fire features across Suffolk and Nassau since 2004, and we know what Long Island winters do to shortcuts.
Juan Nivelo started Cleanscape Enterprise Inc. in 2004 after about ten years in landscaping, and he stands behind every fireplace we build.
Each fireplace we build sits on a concrete footing set below frost depth, so freeze and thaw can’t shift it through a Long Island winter.
Customers tell us we leave things tidy, which matters when a fireplace means excavation, stone dust and wet concrete on your property.
You get a free quote before any work starts, and customers describe our pricing as honest and fair.
An outdoor fireplace is a small building. It has a footing, a firebox, a flue and a stone face, and it weighs far more than a patio or a fire pit. That’s why the first question for any contractor should be how deep the footing goes and where the water ends up.
At Cleanscape Enterprise Inc., we build outdoor fireplaces and backyard fire pits for homeowners across Suffolk and Nassau, from our base in Blue Point to Montauk. Whether you want a real wood fire, a gas fireplace you light with a switch, or a built-in fire pit with seating, we start with your yard, your town’s rules and what’s underneath.
You get a fire feature that stays level, drains properly and fits the patio, so spring is for using it, not repairing it.
Get a free quote for your property. Call (631) 647-7466.
New York’s residential code asks a lot of a masonry fireplace foundation. It calls for concrete or solid masonry at least 12 inches thick, reaching at least 6 inches past the fireplace on every side, resting on undisturbed ground below the frost line. How far down that is depends on code and your town, and sources around Long Island don’t agree, so we don’t guess.
Skip it, or go shallow, and the first hard winter shows. Frost lifts one corner, the veneer cracks, the chimney starts to lean. The fix costs far more than doing it right once, which is why we won’t cut this step on any outdoor fireplace installation.
We walk your property, talk through wood versus gas, and check your town or village’s rules on permits, clearances and open burning before anything gets drawn. Wood-burning features need open sky, so they don’t go under a pergola or roof. Gas features need a gas line, which belongs to a licensed professional with a permit, and industry cost guides put that run at $500 to $3,000 depending on distance.
Then we build the footing, firebox and flue or burner, stone veneer and drainage. A built-in fire pit can go up in one to three days. A custom fireplace usually takes one to two weeks.
We look at your lot, patio and neighbors, then talk through wood versus gas and a realistic budget.
We check permit, clearance and burn rules for your town or village, then settle the design before any digging starts.
We pour the footing, build the firebox and flue or burner, set the stone, handle drainage and clean up.
For anything permanent, usually yes. Portable fire pits often don’t need one, but a built-in fireplace generally does, and a gas line typically needs its own plumbing permit. The rules change from town to town across Nassau and Suffolk—an incorporated village in North Hempstead may have different requirements than Riverhead or Islip. Online answers contradict each other, which is why you should confirm with your town or village before you spend money on design. We check your town before we draw anything, and we tell you up front who files what.
There’s no single number for all of Long Island, and that’s where most online advice goes wrong. The distance depends on your town, whether the fire burns wood or gas, the manufacturer’s instructions for a gas unit, and what’s nearby: your house, a fence, a property line, overhanging branches. A tight lot in North Massapequa plays by different constraints than a larger property out east. A wood-burning fire also needs open sky above it, so it can’t go under a roof or pergola. We confirm the clearances with your town before design, so the plan you approve is one you can actually build.
It comes down to your lot and how you’ll use it. Wood gives you the crackle and the smell, but it also means ash, storing firewood and smoke. On close-together lots across Long Island, smoke is a real source of neighbor complaints. Gas lights with a switch, leaves no ash and is usually the more neighborly choice, though it needs a gas line and a permit. If you have room, as many eastern Suffolk properties do, wood is very workable. If your neighbors sit close and the windows are open all summer, we’d steer you toward gas. We’ll tell you plainly which one fits your yard.
Deep enough to sit below the frost line. New York’s residential code calls for a masonry fireplace footing of concrete or solid masonry at least 12 inches thick, extending at least 6 inches past the fireplace on all sides, on undisturbed earth or engineered fill. Frost depth figures for Long Island vary depending on who you ask, and your town sets the number that applies to you. Inspectors check footing depth before it’s backfilled. Long Island’s freeze-thaw winters will find any shortcut, which is why we treat the footing as the most important part of the build.
We won’t throw out a number before seeing your yard, because two fireplaces that look alike can be priced far apart. The biggest factors are size, wood versus gas, how far the gas line has to run (industry cost guides say $500 to $3,000), the stone you choose, drainage work and whether a patio or seating wall comes with it. Labor typically makes up 40 to 50 percent of the total, and a prefab kit won’t solve the footing, gas or permit questions. Call us for a free quote, and we’ll walk through what drives the cost on your property.
The build itself is shorter than most people expect. A built-in fire pit usually takes one to three days, and a custom masonry fireplace one to two weeks. The wait is design and approval. Town permits can take a few weeks, and gas work adds steps. Fall is when everyone wants a fire, so the practical time to start is winter or early spring. That gives us time to design it, check your town’s requirements and schedule the work. Since we also handle lawn and spring clean-ups, we can fit the surrounding yard work into the same plan.